www.pg2p.nl
It's all about hamradio
23cm playground

Last week I mentioned that I bought two transceivers for 23cm via a Japanese auction site..

My initial planning was to keep one of them in the shack, the Icom IC-3700 (the lower one in the picture) and use the other one (Kenwood TM-541) for mobile fun.

As I found out yesterday this might be the best way forward since the Icom is lacking a UT-84 CTCSS board meaning I cannot generate CTCSS tones with the set; luckily the nearest 23cm repeater, PI6NOS, does not make use of repeatertones (and I hope they will not for a very long period of time, hi!).

The Kenwood set has the ability to generate CTCSS tones so that would be my choice for going mobile.Because both transceivers are quite old they have some quirks like a restricted number of memory channels. Especially the Kenwood is disappointing because for being able to program the Dutch 23cm repeaters (with 28 MHz shift) you need to choose one of the split channels; reason for this is the Kenwood assumes the default shift is 20 MHz. Whatever we always have the VFO mode and a list of repeaters like this one: https://www.hamnieuws.nl/repeaters/uhf-repeaters-1298-mhz/ so enough to experiment I would say :-)

 

Comments

Comment
Your name/nickname
Your website url
Email
content_comment_captcha
This is a required field